Last updated:

SSH Connection Failure

When you use KubeKey to set up a cluster, you create a configuration file which contains necessary host information. Here is an example of the field hosts:

spec:
  hosts:
  - {name: control plane, address: 192.168.0.2, internalAddress: 192.168.0.2, user: ubuntu, password: Testing123}
  - {name: node1, address: 192.168.0.3, internalAddress: 192.168.0.3, user: ubuntu, password: Testing123}
  - {name: node2, address: 192.168.0.4, internalAddress: 192.168.0.4, user: ubuntu, password: Testing123}

Before you start to use the ./kk command to create your cluster, it is recommended that you test the connection between the taskbox and other instances using SSH.

Possible Error Message

Failed to connect to xx.xxx.xx.xxx: could not establish connection to xx.xxx.xx.xxx:xx: ssh: handshake failed: ssh: unable to authenticate , attempted methods [none], no supported methods remain node=xx.xxx.xx.xxx

If you see an error message as above, verify that:

You are using the correct port number. Port 22 is the default port of SSH and you need to add the port number after the IP address if your port is different. For example:
```
hosts:
  - {name: control plane, address: 192.168.0.2, internalAddress: 192.168.0.2, port: 8022, user: ubuntu, password: Testing123}
```
SSH connections are not restricted in /etc/ssh/sshd_config. For example, PasswordAuthentication should be set to true.
You are using the correct username, password or key. Note that the user must have sudo privileges.
Your firewall configurations allow SSH connections.

Feedback

Was this page Helpful?

Receive the latest news, articles and updates from KubeSphere

Thanks for the feedback. If you have a specific question about how to use KubeSphere, ask it on Slack. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.

Previous : Change the Console Language Next : SSH Connection Failure

What’s on this Page